stairs-steps-exterior stairway
Property Management/Owners - Builders - Engineers - Architects
New Enginneering for >>
Replacementsteps is the only patented and manufactured fiberglass replacement
New Stair Technology for Renovation or New Construction Projects
Contributing factors necessitating the replacement of exterior stairs can be climatic conditions such
as cold or heat, rain, excessive sand or earth, along with chemicals such as high salt acidic air, use
of de-icers, or scraping due to the elements. These factors, and others, greatly reduce the physical
strength of the materials and they break down prematurely, each in their own way. Even in marginal
climate areas, erosion, standing water, and general traffic, or abusive traffic is problematic. No
matter what materials are used, whether it be diamond plate metal, solid concrete, concrete poured
in metal pans, or wood, they will never reach a lifespan that justifies the cost.
Replacementsteps are
impervious to all these problems.

All current forms of exterior stair steps, once installed, are
destined to become fatigued products, and have a short lifespan
due to premature failure.

Safety of the stairway is a factor that comes into play with all existing forms of wood, concrete,
concrete on metal pans, and metal, whether solid or perforated. Once damaged, even mildly, or
aged-out, they can create stumble problems that can cause falls, along with the attendant insurance
claims, as well as building code issues. Replacementsteps act as an extra shield against such problems.
Present exterior stair step designs are not aesthetically pleasing. Replacementsteps are most
attractive, and will enhance the overall appearance of any structure!
The Replacementsteps Advantage
Longevity- Metal and/or concrete exterior stairway lifespan can be as little as 7 years.
Replacementsteps lifespan should be a minimum of 30+ years!
Strength- General building codes require step load capacity to be at the 600 lbs. per sq. mark. These
ultra-sturdy steps have been engineered for superior strength. They have been tested and inspected.
Replacementsteps weight bearing capacity exceeds 1500 lbs. per sq. foot!
Installation- The average time to replace metal, concrete in metal pans, or poured concrete* for a
13 to 14 riser stairway is a minimum of 9 to 10 hours. Due to this, another factor other than time and
labor expense can come into play. In certain areas, there are laws and regulations that prohibit the
closing down of stairways for more than a few hours. Note this! The time for demolition of an existing
stairway of 13 to 14 risers, to the time of the completed Replacementsteps installation is less than 4
hours! This factor alone adds up to a tremendous saving of time and money.
*Certain places, due to terrain or other conditions, make it impossible for concete trucks to get to a
site, or position themselves to pour their load. Note: Solid concrete cannot be used past 2 stories;
wood past 3 stories.
Safety- Tripping problems are not a factor with Replacementsteps because they will not crack or
scale. There is a built-in skid finish to protect tenant/guest pedestrians. This is the same skid
protection used by the US NAVY on the decks of their aircraft carriers. The steps are interlocked as
they are installed, and as such, act as a single unit from top to bottom, thereby creating a solid and
stable base that negates movement under weight. Replacementsteps offers superb rigid stability!
This is a 6400 lb. Lincoln Navigator that has been driven onto two individual
Replacementsteps. The steps are situated up on blocks at each end for an
acute demonstration of their strength and resiliency. If this test was done
with an average fatigued metal step, it would bend, and not come back to
its original shape. A tested concrete step with a metal pan would have to
be replaced. But, as shown in the photo on the right, the Replacementsteps
step will not break, and snaps back to its original shape. Amazing!
The Problem_________________________________
The Answer
Replacement Steps
Diamond Plate
Metal
Under concrete
over metal
Concrete over
Metal Pan
Renovation
New Construction
step for exterior stairs / stairways in the construction/engineering marketplace today.
Associate
Member
Cost- The initial cost of utilizing Replacement Steps as an alternative to conventional stairway
construction or renovation is about the same, but, Replacement Steps has a longevity that
exceeds, by several times, standard methods.
Are your $$$ brain cells twitchin about now!!!
Vendor
National Association of
Rental Property Managers
Member / Vendor
AAOA
American Apartment
Owners Association